Skip to main content

Marvel vs. Capcom: Infinite - General Troubleshooting Guide - Steam

  • Updated

While we really do hope everyone will be able to enjoy the game, there are always cases where the game may not launch or run correctly under certain software environments, hardware combinations, or otherwise.

Please follow these steps to resolve your issue.

Troubleshooting Guide

  1. Check the game's system requirements
  2. Add the game’s files and folders to your anti-virus software’s exception list
  3. Give Administrator Privileges to Steam and the game
  4. Update your Video/Graphics Drivers and Windows Operating System
  5. Check your graphics driver settings & computer power settings
  6. Force the game to run in windowed mode
  7. Reinstall the Unreal Engine 4 Redistributable Package and Update DirectX
  8. Verify the game’s cache in Steam
  9. Still having trouble?

1. Check the game’s system requirements

Please make sure you meet the minimum requirements for the game, outlined here; if you do not meet the minimum requirements for the game, this may result in poor framerate, or the game not running.

Please note that some high end integrated graphics chips and modern laptop class discrete GPUs may work, but have not been tested, nor are they officially supported by Capcom. If you’re using a multi-GPU setup such as NVIDIA’s SLI or ATI’s Crossfire technologies, we recommend experimenting with disabling these settings, as they may cause compatibility issues with the game.

If you are using a laptop with a dedicated graphics card, we recommend disabling your integrated graphics via the BIOS settings prior to launching Marvel vs. Capcom: Infinite. For more information on accessing your BIOS, please see your laptop/motherboard manufacturer manual.

Capcom does not warrant nor officially provide technical support for PCs that do not meet the official, minimum system requirements.

2. Add the game's files and folders to your anti-virus software’s exception list

Some launching issues may be attributed to certain Anti-Virus software preventing the game executable from launching due to a false-positive error. We recommend users add all of the following files and folders to the Anti-virus and Firewall exclusion list to prevent this issue. If these files and folders were already added previously, try removing them from the exclusion list and re-adding them.

To quickly access the following folders, press Windows Key + R then copy and paste the folder URL below.

MVCI.exe
C:\Program Files (x86)\Steam\steamapps\common\MARVEL VS. CAPCOM INFINITE
C:\Program Files (x86)\Steam\steamapps\common\MARVEL VS. CAPCOM INFINITE\MVCI\Binaries\Win64

Steam.exe
C:\Program Files (x86)\Steam

Steam AppData
C:\Users\%USERNAME%\AppData\Local\Steam

For a guide on adding exceptions to your anti-virus software, please visit one of the following links:

*Please note that for Bitdefender, you will need to also add the two MVCI.exe to the program’s Whitelist. To do this, do the following:

  • Open Bitdefender

  • Go to the Protection tab

  • Click “View Feature”

  • Click the gear icon inside the “Advanced Thread Defense” box

  • Select “Add applications to the whitelist”

  • Browse and navigate to the following two MVCI.exe files:

    • C:\Program Files (x86)\Steam\steamapps\common\MARVEL VS. CAPCOM INFINITE

    • C:\Program Files (x86)\Steam\steamapps\common\MARVEL VS. CAPCOM INFINITE\MVCI\Binaries\Win64

  • Once both MVCI.exe files are added, close Bitdefender and relaunch the game

3. Give Administrator Privileges to Steam and the game

Some users can get the game running properly by running Steam.exe in administrator mode. This can be done by right-clicking on the .exe file and selecting “Run as administrator.” If that doesn’t work, try running the game’s MVCI.exe in administrator mode as well.

4. Update your Video/Graphics Drivers and Windows Operating System

There are additional steps we can recommend trying. Try updating your video card drivers, as oftentimes outdated drivers can cause a variety of issues ranging anywhere from in-game graphical problems, to the game not starting, and more.

Additionally, please ensure that Windows Update has been run from the Control Panel and that all the latest updates have been installed on your system.

If you still experience issues, you may want to try performing a clean installation of the video driver set. This will remove any extraneous driver DLL files or game profiles that existed with the previous driver installation.

To do a clean video driver install, many enthusiasts use a third-party program called Display Driver Uninstaller (DDU), which completely removes components that were part of the original driver installation package.

  1. Run DDU and uninstall old video driver.

  2. Install the latest OEM video card driver and reboot your PC.

  3. Run the latest DirectX installer package and reboot your PC.

5. Check your graphics driver settings & computer power settings

To reiterate, some high end integrated graphics chips and modern laptop class discrete GPUs may work, but have not been tested, nor are they officially supported by Capcom. Laptops with dual GPUs, such as an Intel Integrated Graphics Processor and Nvidia Dedicated Graphics Card, may need additional configuration in the event the integrated processor is overriding the dedicated graphics drivers.

If using a dual Nvidia / Intel GPU, follow these steps:

  1. Install the latest Intel integrated drivers

  2. Reboot your PC

  3. Open Nvidia Control Panel

  4. Click 'Manage 3D Settings'

  5. Go to 'Program Settings' and then select ‘Marvel vs. Capcom: Infinite’ (if it is not in the list you can add it manually by clicking 'Add')

  6. Scroll down to 'Power Management Mode'

  7. Set it to 'Prefer Maximum Performance' / ‘High Performance Processor’ instead of 'Adaptive'

  8. Close Nvidia Control Panel and launch Marvel vs. Capcom: Infinite

If using a dual AMD “Switchable Graphics” GPU, follow these steps:

  1. Open AMD Catalyst Control Center

  2. Under “Switchable Graphics”, select the High Performance section and select

  3. Click ‘Apply’

  4. Close AMD Catalyst Control Center and launch Marvel vs. Capcom: Infinite

Additionally, double-check your desktop / laptop’s power settings by performing the following:

  1. If using a laptop, ensure the charger is connected

  2. Open Control Panel

  3. Select Power Options

  4. Select “Change Plan Settings”

  5. Select “Change advanced power settings”

  6. From within the dropdown menu, select “High performance” and click ‘Apply’ then ‘OK’

  7. Launch Marvel vs. Capcom: Infinite

6. Force the game to run in windowed mode

If you are experiencing a crash at launch or crash during gameplay, try forcing the game to run in windowed mode by following these steps:

  1. From the Steam client, select "Library"

  2. Right-click Marvel vs. Capcom: Infinite and select "Properties"

  3. Click "Set launch options"

  4. Type "-fullscreen" without quotation marks and click "OK"

  5. Launch the game

7. Reinstall the Unreal Engine 4 Redistributable Package and Update DirectX

Reinstalling the game’s Unreal Engine 4 Redistributable file may also help resolve the problem. The installer for this file is located in the following location:

UE4PrereqSetup_x64.exe
C:\Program Files (x86)\Steam\steamapps\common\MARVEL VS. CAPCOM INFINITE\Engine\Extras\Redist\en-us

We also recommend downloading and running the DirectX End-User Runtime Web Installer to update DirectX.

8. Verify the game’s cache in Steam

Try verifying the game's cache in Steam. You can do so by following the steps outlined in this Steam support article (reposted below). This may find missing or damaged files that need to be repaired, even if you've just installed the game. You may also try temporarily disabling your anti-virus while verifying the cache or launching the game, as on occasion anti-virus programs may flag games or the files necessary to play them as a virus.
To verify the game’s cache, follow these steps:

  1. Restart your computer and launch

  2. From the “ section, right-click on the game and select “ from the menu.

  3. Select the “ tab and click the “ button.

  4. Steam will verify the game's files - this process may take several minutes.

  5. Important: One or more files may fail to verify. This is normal for most Steam games. The files that fail to verify are local configuration files that should not be replaced as part of this process.

9. Still having trouble?

If you are still experiencing issues even after trying the steps above, please Submit a Request and provide all the information below in your ticket:

DxDiag report:

  1. Open a "Run" dialog in Windows. This can either be done by typing "run" into Start Search, or by holding the Windows key and pressing "R." (Either method works in Windows Vista, 7, 8, 8.1, and 10.)
  2. Type "dxdiag" (with or without quotes) into the box that comes up.
  3. From the DirectX Diagnostic Tool window, wait for the tool to gather the information it needs, then click "Save All Information..." which will ask you to save a text file, named "DxDiag.txt" by default. Save this file somewhere where it will be easy to find, then attach it in your response.

 

---

Last update: 2026/07/13